pk10五码三期必中稳赢经验

Autoclave manufacturer-Zhucheng Xintai New Material Co., Ltd. welcomes your visit!

Autoclave manufacturer logo

Zhucheng Xintai New Material Co., Ltd.-Dedicated to carbon fiber autoclave, composite material autoclave
15095220299
0536-6576161

Autoclave Encyclopedia

    contact us

    Zhucheng Xintai New Material Co., Ltd.
    Contact: Manager Li
    Mobile: 15095220299
    Phone: 0536-6576161
    Fax: 0536-6067766
    Email: leediv@163.com
    Address: North Section of Luhe Avenue, Zhucheng City, Shandong Province

    Autoclave Encyclopedia

    You are here: Homepage of Autoclaved Tanks >> Encyclopedia of Autoclaved Tanks

    Introduction of the price trend of carbon fiber autoclave

    人气:439 发表时间:2019-04-30 14:38:59 Article Source: Xintai Autoclave Popularity: 439Time: 2019-04-30 14:38:59

    In order to know the price of carbon fiber autoclave, we should know some details of the product in order to get a general understanding. Carbon fiber autoclave can be used for metal / non-metal bonded components and resin-based high-strength glass fiber, carbon fiber, boron fiber, key equipment for thermoforming and curing aramid fiber and epoxy resin composite materials, can absorb and heat composite Product vacuum, pressure and curing, carbon fiber autoclave, suitable for different markets and different products. Design different types and requirements of carbon fiber autoclave, mainly research and experimental carbon fiber autoclave, civilian production carbon fiber autoclave, military production carbon fiber autoclave. It can be seen from the above that the price trend of carbon fiber autoclave has been stable. Of course, this is only for some manufacturing process costs of the manufacturing enterprise, and the main material steel plate or stainless steel is controlled by the market, so we cannot predict In addition, the cost of labor is rising every year, so the price will gradually increase.


    碳纤维热压罐


    Use computer automatic control to collect temperature data in the tank. The pressure data is transmitted to the computer control box, and the temperature value in the tank is displayed on the touch screen panel in real time. Pressure value, convenient and intuitive. Temperature parameters, pressure parameters, vacuum parameters, time parameters, etc. can be set according to the product's own requirements.

    Carbon fiber autoclave The carbon fiber autoclave is automatically controlled by a computer and collects the temperature data in the tank. The pressure data is transmitted to the computer control box, and the temperature value in the tank is displayed on the touch screen panel in real time. Pressure value, convenient and intuitive. Temperature parameters, pressure parameters, vacuum parameters, time parameters, etc. can be set according to the product's own requirements. Therefore, the carbon fiber autoclave is a completely designed heat curing device.

    1. Independent support of the tank door: The carbon fiber hot-pressed tank can not bear the weight of the tank door, and the tank body will not be deformed due to the weight of the tank door.

    2. Use toothless three-ring structure door: After installing the tank door to the tank, it does not need to rotate and is clamped by the third ring. The tank door switch is unobstructed. Its main feature is that the movable door and fixed door do not rotate, and the third ring is tightly clamped. When the door is opened and closed, the seal is protected from friction and wear.

    3. The tank door adopts a self-protection ring: the tank door seal ring is sealed by compressed gas in a carbon fiber hot-pressed tank, and the seal ring is not squeezed by external forces. Since the tank door lock does not need to rotate, the sealing ring is not subject to friction and wear.

    4. The seal has a special cooling system: In order to ensure that the seal is protected from thermal damage, Truz is equipped with a sealed cooling system for carbon fiber autoclave, the working temperature is higher than 200 ° C, so the gasket is used at high temperature long life.

    5.Unique heating system: A heater composed of multi-layered heating tubes with fins is installed at the inlet end of the centrifugal fan. The heat exchange between the circulating gas and the heater is fully carried out, the heat exchange effect is good, and the heat energy is used. The rate is high.

    6. Pre-cooling with atomized water: When pre-cooled, compressed air atomizes the cooling water. Under the action of compressed gas, the atomized water can enter the carbon fiber autoclave tank cooler uniformly like a gas, so that the cooling rate of each part of the cooler is uniform, the thermal shock discharged by the cooling water is small, and the thermal deformation is small. Control the cooling speed of carbon fiber autoclave with high precision.

    7. Professional calculation software: used for fan blade surface design, tailpipe, air duct design, high temperature consistency up to ± 1 ° C

    8. DCS control system can be adopted, that is, distributed control. Data is transmitted from the sensors distributed in the equipment to the central processing system for processing. The DCS control system has large capacity, reliable control, safety and reliability, and is especially suitable for large carbon fiber autoclave. .


    At present, the leading domestic products are carbon fiber autoclave, glass fiber autoclave, composite autoclave, laboratory small carbon fiber autoclave, large autoclave, military autoclave, auto parts autoclave, and civil autoclave. Installation, can be customized according to customer requirements diameter 400mm to 4500mm requirements. The unique design concept ensures that the temperature before and after the tank door is consistent, and that the cured product meets customer requirements in terms of appearance and performance.


    碳纤维热压罐



    During the high temperature curing process, the temperature, pressure, time, vacuum and other working procedures of the carbon fiber autoclave are automatically controlled by the automatic control system used by our company. It is a new type of energy-saving, high-efficiency environmental protection heating curing equipment successfully developed by our company. The device does not require manual operation and achieves good working results in automatic operation. This program is designed for automatic vacuum, automatic heating, automatic insulation, and set up procedures, no operator is needed, and the goods can be picked up directly after working hours, saving labor and energy consumption can greatly reduce the production cost of the enterprise, Now take the carbon fiber autoclave produced by our Zhucheng Xintai as an example when we are leaving the factory.
    © 2018 Zhucheng Xintai New Material Co., Ltd. All rights reserved
    Address: North Section of Luhe Avenue, Zhucheng City, Shandong Province
    Phone: 15095220299 Fax: 0536-6067766
    Main Products: Composite autoclave | Carbon fiber autoclave
    Lu ICP No. 16017594 No.-12

    Service purposes:

    Zhucheng Xintai New Material Co., Ltd. is a professional autoclave manufacturer. We provide free on-site commissioning and technical guidance. Our company has a strong service team and its own production plant. Customers can see our heat at any time The manufacturing site of the autoclave equipment allows users to purchase with ease and worry.

    Micro signal of autoclave tank manufacturer